Manufacturing critical-service valves since 1991
Engineered for critical flow.Trusted where failure isn't an option.
Cast and forged steel gate, globe, check, ball, butterfly and cryogenic valves from 1/2" to 48", Class 150 to 2500 — designed, machined, assembled and tested at our own plants in Nashik for refineries, LNG terminals and power projects across three continents.
930+
Projects supplied
1,017+
Satisfied clients
50+
Customised solutions
35+
Years of manufacturing
Every valve hydrostatically shell and seat tested before release — no exceptions.
Approved & certified
Who we are
Three decades of building valves that hold when the line goes hot.
Panchvati Valves & Flanges Pvt. Ltd. has manufactured industrial valves from Nashik since 1991. What began as a small machining operation now runs two dedicated plants, an in-house test bay and an export desk serving six countries. Our work sits in refinery isolation loops, LNG cold boxes, boiler feedwater circuits and fertiliser synthesis lines — places where a valve is judged only by whether it never becomes the reason for a shutdown.
Built, not assembled
Bodies, bonnets and trim are machined and finished on our own floor, giving us control over tolerance, traceability and delivery.
Engineered per order
Over 50 customised valve solutions delivered against client-specific metallurgy, trim, end-connection and testing requirements.
Trusted by
Approved and specified by India's refineries, utilities and global EPC contractors.
Why specifiers choose us
Four reasons our valves clear third-party inspection first time.
Cryogenic capability
Extended-bonnet gate, globe and check valves proven in liquid nitrogen to -196 °C for LNG, hydrogen and air-separation duty.
Two in-house plants
Machining, assembly, heat treatment and testing across two MIDC Ambad units, so schedule and quality stay under one roof.
Certified to global codes
ISO 9001:2015, ISO 45001, PED/CE marking and IBR approval, with designs to API 600, API 602, BS 1873 and BS 1868.
Export-ready documentation
Third-party witnessed inspection and complete data books accepted by EIL, Bureau Veritas, DNV, TÜV and Lloyd's Register.
Product range
Seven valve families, one accountable manufacturer.
Isolation, regulation and non-return duty across carbon, alloy and stainless metallurgy — specified to API, BS and ASME codes and supported by full material traceability.
Need something outside the catalogue?
Send us the datasheet, P&ID extract or specification. We have delivered more than 50 customised valve builds against client-specific requirements.
-196 °C
Tested to BS 6364
Our differentiator
Cryogenic valves — the capability most Indian valve suppliers cannot offer.
Cryogenic service punishes shortcuts. Bonnet length has to be calculated so the gland never enters the frost zone, body material has to survive impact testing at temperature, and every unit has to be proven cold before it leaves. We build cryogenic gate, globe and check valves across our full size range and test them in liquid nitrogen with helium leak detection.
Extended bonnets dimensioned per installation orientation
Vapour-space gland design that keeps ice off the packing
Impact-tested LTCS and austenitic stainless bodies
Oxygen-clean, degreased assembly for O2 and hydrogen service
Industries served
Specified into the plants where downtime is measured in crores.
From sour-service isolation in refineries to synthesis loops in fertiliser complexes, our valves are selected against the specific failure mode each industry fears most.
Quality assurance
Documentation that survives the client's inspector.
Our quality system is written for buyers who verify rather than assume. Material identification, dimensional checks, NDE, pressure testing and preservation are each recorded and issued as a consolidated data book with the consignment.
ISO 9001:2015
Quality Management System
Documented control from enquiry review and material procurement through machining, assembly, testing and dispatch, audited on a recurring surveillance cycle.
ISO 45001
Occupational Health & Safety
Hazard identification, risk assessment and incident reporting embedded in shop-floor routine across both manufacturing units.
PED / CE Marking
European Pressure Equipment Directive
Conformity assessment for pressure-bearing valve categories, enabling supply into European Union projects without additional certification burden on the buyer.
IBR
Indian Boiler Regulations
Approved builds for steam and boiler service, with IBR Form III-C certification issued against the applicable order.
Third-party inspection
Witnessed testing routinely carried out with Bureau Veritas, DNV, TÜV, Lloyd's Register and EIL representatives on our floor.
Global presence
Supplying six export markets from two Nashik plants.
The United States remains our largest export destination, supported by established supply into Spain, Saudi Arabia, Poland, Mexico and Nigeria. Western Europe is our current growth focus, backed by PED/CE conformity.
United States
Largest export market
Spain
Southern European gateway
Saudi Arabia
GCC growth market
Poland
Established supply base
Mexico
Active project supply
Nigeria
West African projects
Next step
Send us your valve specification. We will come back with a technical offer, not a brochure.
Share the datasheet, size, class, metallurgy and testing requirement. Our engineering desk in Nashik reviews every enquiry directly.